- Pedal Config Tool
- MIDI Stream Config
- MIDI To DMX Editor
- AMC Tool
- MMC Tool
- RTP-MIDI Tool
- MIDI To CV Editor
- Upgrade Tool
Pedal Config Tool is used to configure DOREMiDi's MIDI pedal products(MPC-10/MPC-20/FC-1/FC-3,etc). Users can use Pedal Config Tool to configure the pedal to output MIDI messages. Supports expression pedals, switch pedals, and hi-hat pedals. MIDI messages support Continue Controller, i.e. CC/Program Change/NOTE/Pitch Bend/Channel Pressure/MIDI Stop/MIDI Continue /MIDI Start, etc. The software supports Windows and MacOS.
Note: If the software is not applicable to your product, please try to update the firmware or change the software version
MacOS（Requires MacOS V13.0 and above ）
| Version | Software Download | Update Content |
| V4.0.0 | Pedal Config Tool V4.0.0.dmg | Improve the firmware upgrade function. |
| V3.0.8 | Pedal Config Tool V3.0.8.dmg | Solve the crash problem of MacOS15.5 and above. |
| V3.0.6 | Pedal Config Tool V3.0.6.dmg | 1. Support FC-3 configuration switch pedal MIDI Tempo. 2. Support FC-3 configuration expression pedal Curve and Trigger level. (Note: Need to use FC-3 V1.1.2 version of firmware.) 3. Improve the device "Connect" and "Check". |
| V3.0.5 | Pedal Config Tool V3.0.5.dmg | 1. Improve software compatibility, compatible with MacOS13.0 and above. 2. Improve interface display. |
| V3.0.4 | Pedal Config Tool V3.0.4.dmg | 1. Added FC-1 MIDI clock settings(Tempo). 2. The product will enter the upgrade mode, and the software will obtain the latest firmware when you open Setting-Firmware Upgrade. 3. Added Help-Check for Update. 4. Resolving Pitch Bend configuration errors. (Note: Requires MacOS V13.6.1 and above. FC-1 requires the latest firmware.) |
| V3.0.0 | 1. Configure interfaces for different pedal types. 2. Adjust the color layout of the interface. 3. Add curve configuration to the expression pedal and hi-hat pedal. 4. Add Trigger Level configuration to the expression pedal. 5. Add Start/Stop/Continue to the switch pedal. 6. Add the display of note names and CC controller names. 7. Add the firmware upgrade function. 8. Add the pedal polarity flip "Evert"function. (Note: Requires MacOS V13.6.1 and above. Please use the latest firmware for this product. Please use V1.2.4 firmware or above for FC-1. Please use V1.1.1 firmware or above for FC-3. Please use V2.4.3 firmware or above for MPC-10. Please use V2.0.1 firmware or above for MPC-20.) | |
| V2.3 | Pedal Config Tool V2.3.dmg | Solve the problem that fonts are invisible under different themes of MacOS. |
| V2.2 | Pedal Config Tool V2.2.zip | Signed Software. |
| V2.2 | Pedal Config Tool V2.2_Unsigned.dmg | Unsigned software, This software needs to open permissions in Privacy & Security settings. |
Windows
| Version | Software Download | Update Content |
V4.0.0 | Pedal_Config_Tool_V4.0.0_For_Windows.exe | Improve the firmware upgrade function. |
V3.0.5 | Pedal_Config_Tool_V3.0.5_For_Windows.exe | 1. Support FC-3 configuration switch pedal MIDI Tempo. 2. Support FC-3 configuration expression pedal Curve and Trigger level. (Note: Need to use FC-3 V1.1.2 version of firmware.) 3. Improve the device "Connect" and "Check". |
V3.0.4 | Pedal_Config_Tool_V3.0.4_For_Windows.exe | 1. Improve interface display. |
V3.0.3 | Pedal_Config_Tool_V3.0.3_For_Windows.exe | 1. Added FC-1 MIDI clock settings(Tempo). 2. The product will enter the upgrade mode, and the software will obtain the latest firmware when you open Setting-Firmware Upgrade. 3. Added Help-Check for Update. (Note: FC-1 requires the latest firmware) |
| V3.0.0 | Pedal_Config_Tool_V3.0.0_For_Windows.exe | 1. Configure interfaces for different pedal types. 2. Adjust the color layout of the interface. 3. Add curve configuration to the expression pedal and hi-hat pedal. 4. Add Trigger Level configuration to the expression pedal. 5. Add Start/Stop/Continue to the switch pedal. 6. Add the display of note names and CC controller names. 7. Add the firmware upgrade function. 8. Add the pedal polarity flip "Evert"function. (Note: Please use the latest firmware for this product. Please use V1.2.4 firmware or above for FC-1. Please use V1.1.1 firmware or above for FC-3. Please use V2.4.3 firmware or above for MPC-10. Please use V2.0.1 firmware or above for MPC-20.) |
| V2.2 | Pedal Config Tool V2.2 for Windows.zip |
USB COM Driver
If the Windows PC cannot recognize the device during the setting, it may be that the computer is installing the driver. Please try to install the driver and then follow the firmware upgrade instructions.
Virtual COM Port Driver V1.5.0.zip
Windows: MIDI Stream Config for Windows.zip
MacOS（Requires MacOS V13.0 and above ）: MIDI Stream Config for MacOS.dmg
Note: If the Windows PC cannot recognize the Device, it may be because the computer is missing a USB driver. Please try to install the driver and then follow the firmware upgrade instructions.
Virtual COM Port Driver V1.5.0.zip
MIDI To DMX Editor
| Version | User Guide | Software Download | Update Content |
| V3.0.2 | MIDI To DMX Editor User Guide.pdf | Windows: MIDI To DMX EditorV3.0.2.exe MacOS: MIDI To DMX EditorV3.0.2.dmg | 1. Eimulator adds some DMX device images. 2. Improve some displays. |
| V3.0.0 | MIDI To DMX Editor User Guide.pdf | Windows: MIDI To DMX EditorV3.0.0.exe MacOS: MIDI To DMX EditorV3.0.0.dmg | 1. Optimize the use of some Windows systems. 2. Add MIDI to DMX simulator, which can simulate MIDI output to MTD devices |
| V2.0.1 | MIDI To DMX Editor User Guide.pdf | Windows: MIDI To DMX EditorV2.0.1.exe MacOS: MIDI To DMX EditorV2.0.1.dmg | Improve the fade-in and fade-out effects. Requires firmware verdion V1.2.8 and above. |
V2.0.0 | MIDI To DMX Editor User Guide.pdf | Windows: MIDI To DMX EditorV2.0.0.exe MacOS: MIDI To DMX EditorV2.0.0.dmg | 1. Add fade In function. 2. Add a note to indicate the conversion of each SN. 3. Add DMX channel aliases, which can be used to name the DMX channel. |
| V1.0.0 | MIDI To DMX Editor User Guide.pdf | Windows: MIDI To DMX EditorV1.0.0.exe MacOS: MIDI To DMX EditorV1.0.0.dmg | |
Note:
1. Firmware V1.1.9 or above is required. For products with firmware before V1.1.9(Windows):AccessPort.zip
2. If the Windows computer does not recognize the product, try installing the USB driver: Virtual COM Port Driver V1.5.0.zip
3. For more firmware information on MTD-1024, please click on MTD-1024.
4. MacOS（Requires MacOS V13.0 and above ）
AMC Tool is suitable for DORMEiDi's Audio MIDI USB Cable, such as AMC-10, AMC-11, etc.
Windows: AMC Tool.exe
MacOS（Requires MacOS V13.0 and above ）: AMC Tool.dmg
Windows: MMC Tool for Windows
MacOS（Requires MacOS V13.0 and above ）: MMC Tool for MacOs
Firmware upgrade driver
If the Windows PC cannot recognize the device during the upgrade process, it may be that the computer is installing the driver. Please try to install the driver and then follow the firmware upgrade instructions.
Virtual COM Port Driver V1.5.0.zip
RTP-MIDI Connection Tutorial:
DOREMiDi Network MIDI Config Instructions V1.0.pdf
zeroconfServiceBrowserSetup_1_0_4_7.zip
MacOS（Requires MacOS V13.0 and above ）: IP_Tool.dmg
Windows: IP_Tool.exe
Note: IP tool is only suitable for MR-1 PoE.
MIDI To CV Editor is suitable for use with DOREMiDi MIDI to CV devices. It can configure the parameters of Gate/CV/AUX ports.
Windows: MIDI To CV Editor.exe
MacOS（Requires MacOS V13.0 and above ）: MIDI To CV Editor.dmg
The DOREMiDi Upgrade tool is applicable to all DOREMiDi products, but other software also comes with firmware upgrade functionality. You can first check if the software you are using comes with firmware upgrade functionality before deciding whether to download this tool.
Windows: DOREMiDi Upgrade tool for Windows
MacOS（Requires MacOS V13.0 and above ）:DOREMiDi Upgrade tool for MacOs
Note: If the Windows computer does not recognize the product, try installing the USB driver: Virtual COM Port Driver V1.5.0.zip